Shanghai floor waxing, floor renovation, teak floor, hot wax, hot wax, paint, wood floor renovation 

 Solid wood floor renovation 
 Even the best wood flooring in the use of a few years there will be face off peeling paint or wax, etc., such a great impact on the decorative effect of the overall appearance, and after Diaoqi if not in time, such as trace or traces of oil into the water after will not restore the original state. To replace the expensive wooden floor, then not only will spend a large expense, and time-consuming, the use of this service, only to spend 10% of the cost of reloading the cost of -20% can make your floor a new look. 
 One. Wooden floor renovation of the construction procedure 
 1, the use of large-scale renovation of wooden floor sanding machine several times to remove paint, surface, wood layer of about 0.5 mm, and then by carefully sanding the surface of the floor and delicate, smooth to a whole new state. Floor corner with a small angle grinder for grinding to achieve the overall smoothing effect. 
 2, the original side seam transparent putty removed and re-sealed seams. 
 3, until primer is dry, brush finish the first pass, to be dry. 
 4, water carefully sandpaper grinding, surface grinding to be somewhat rough, remove Fenxie, brush paint the second level. 
 5, until the last over finish marked the floor after all the wax to dry. 
 II. In addition to the following conditions to be done to wood floors, waxing, special treatment needs refurbishment 
 1, such as humidity causes mildew discoloration after immersion in the floor, such floor needs a part replaced. 
 2, after the damp floor uplift, to carry out renovation after leveling the floor demolition. 
 3, severely damaged the floor needs some replacement.